Tabs - Nakajima AE-710 Operation Manual

Tabs
@ (tr)
@ (tr)
@ (tr)
@(E)
e(E)
Setting a tab
I ) Use the Space bar or the Backspace key to position the canier at
the point where you want to set a tab.
2) Press the Tab set key. A beep sounds to signal that the tab has
been set. A maximum of 30 tab stops can be set.
Clearing a tab
l) Position the carrier at the tab you want to clear.
2) Press the Tab clear key. A beep sounds to signal that the tab has
been cleared.
Clearing all tabs
I ) Press the Tab clear key at any position.
2) Press the Repeat key. Two beeps sound to signal that all tabs
have been cleared.
Using a tab
I ) Press the Tab key The carrier moves to the first tab setting to the
right of your current position.
2) Type the text.
Tab back-up
The current tab settings are maintained in memory by the back-up
battery even when you turn off the typewriter. You can use those
tabs when you turn on the typewriter next time.
l l