M-Audio ProjectMix I/O User Manual page 32

Flip Button (FLIP)
Press the FLIP button to switch the parameter assignment between the faders and the encoder knobs (i.e., the parameter assigned to the
encoder knob is now controlled by the fader, and vice-versa). As the faders are touch-sensitive and the encoder knobs are not, assigning the
encoder knob functions to the faders allows you to write smoother automation.
Channel Information Button (CHAN INFO)
Encoder Knob 1 controls Volume Level of selected channel
Encoder Knob 2 controls Pan of selected channel
Encoder Knob 3 controls Output Selection of selected channel
Encoder Knob 4 controls Input Selection of selected channel
Encoder Knob 5 controls Phase Inversion of selected channel
Encoder Knob 6 controls Stereo/Mono Selection of selected channel
Encoder Knob 7 controls FX On/Off Selection of selected channel
Encoder Knob 8 controls FX Send Level of selected channel
Set Up Button (SET UP)
Press the SET UP button and follow the instructions on the LCD display to access the utility functions of the ProjectMix I/O.
MIDI Button (MIDI)
The MIDI button activates MIDI mode on the ProjectMix I/O and opens the built in MIDI application (see the section of this manual on MIDI
Application). Pressing the MIDI button again puts the ProjectMix I/O back in to DAW Mode.
Lock Button (LOCK)
The LOCK button disengages the transport buttons (20-24). It does not affect the jog wheel (19).
Loop Button (LOOP)
The LOOP button activates and deactivates Loop mode.
Nudge Buttons (t NUDGE u)
The tNUDGE button is inactive in SONAR.
The NUDGEu button opens the event editor list for the selected channel.
Locate Buttons (t LOCATE u)
The LOCATE (t / u) buttons move the transport to the previous or next assigned marker.
Set Button (SET)
Pressing the SET button will place a marker at the transport's current location.
In Button (IN)
This button is inactive in SONAR.
Out Button (OUT)
This button is inactive in SONAR.
Window Button (WINDOW)
When an audio region is already selected, pressing the WINDOW button opens the Audio Editor window. If no audio region is selected, the
WINDOW button opens the Loop Explorer window.
Arrow Buttons (t, p, u, q)
Holding down the ZOOM button and pressing the arrow buttons zooms in and out within the arrangement window.
Zoom Buttons (ZOOM)
As above, holding down the ZOOM button and pressing the arrow buttons zooms in and out within the arrangement window.
Scrub Button (SCRUB)
Press the SCRUB button (it's LED lights up) to enable the jog wheel to scrub audio. Press SCRUB again (LED is off) and the jog wheel scrolls the
transport.
SONAR Mode
ProjectMix I/O User Guide
31