Live 5 Mode - M-Audio ProjectMix I/O User Manual

Live 5 Mode

To enter Live mode: Hold down the AUX 5 button while powering on the unit. Live mode is confirmed on the LCD display when the ProjectMix
I/O has initialized.
PC/Mac Setup: With the ProjectMix I/O in Live mode, launch the application on your computer and choose Preferences from the Options
menu (if you're using a Mac, the Preferences are located in the Live menu). Next, select the MIDI/Sync tab. In the "Remote Control Surfaces"
section at the bottom of the frame, select Mackie Control from the list of controllers. Select "ProjectMix Control Surface MIDI" for input and
output ports, and then click Okay. ProjectMix I/O now controls Live.
NOTE: In most cases where there are multiple-page parameter controls specific to Live, we have documented the full range of editing
parameters. However, many virtual Instruments and plug-ins can contain up to 50 pages of parameters or more; this, combined with the
sheer number of plug-ins and virtual instruments available, makes it beyond the scope of this manual to document them all. We have
therefore focused on the control aspects specific to Live itself.
In addition, we have not included in this section control functions that are covered elsewhere in this manual, such as Channel Faders, Mute,
Solo, Select, Record and Transport buttons. These controls operate in Live the same way as described earlier in the section about the Pro
Tools mode.
Note one exception to the statement above: In Arrangement view, pressing ALT and PLAY together will toggle Live's Follow mode.
AUX 1 Button
Encoder Knob 1 controls FX Send A level on selected channel
Encoder Knob 2 controls FX Send B level on selected channel
Encoder Knob 3 controls FX Send C level on selected channel
Encoder Knob 4 controls FX Send D level on selected channel
Encoder Knob 5 controls FX Send E level on selected channel
Encoder Knob 6 controls FX Send F level on selected channel
Encoder Knob 7 controls FX Send G level on selected channel
Encoder Knob 8 controls FX Send H level on selected channel
AUX 2 Button
This serves the same function as clicking the Back To Arrangement button in Live.
AUX 3 Button
Activates/deactivates the Draw Mode switch.
AUX 4 Button
Shows/hides the Browser pane.
AUX 5 Button
Shows/hides the Clip/Track View pane.
Pan Buttons (PAN)
Encoder Knobs 1 – 8 control Pan on channels 1 – 8.
Plug In Button (PLUG IN)
The PLUG IN button controls the parameters of the loaded plug-ins.
Press PLUG IN once and the names of the available plug-ins are displayed. Hold ALT and press any of the SEL 1 – 8 buttons selects any of the
loaded plug-ins in the order they are loaded. Release ALT and the encoder knobs control the parameters of the selected plug-in.
As stated above, due to the vast number of different plug-ins on the market, it is beyond the scope of this manual to document each plug-in's
specific editing parameters.
Select In Button (SEL IN)
The SEL IN button works in the following ways with Pages 1-4:
Page One: Scrolls Output types on SELected channel.
Page Two: Scrolls Output channels on SELected channel.
Page Three: Scrolls Input types on SELected channel.
Page Four: Scrolls Input channels on SELected channel.
Select Out Button (SEL OUT)
Function is identical to SEL IN button.
32 Live 5 Mode