Table of Contents
Advertisement
Alternate Setup Method
1.
Select your State
Select your state from the drop-down menu (1). The "Login
Server" box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See "User Decide Login Server Manually" (4).
2.
User Name
Provided by your ISP. Type in your user name here (this should
be the same as your email address, but with the "@bigpond.com"
part removed).
3.
Password
Type in your password and retype it into the "Retype Password"
box to confirm it (this should be the same as the password you
use for your BigPond email account).
4.
User Decide Login Server Manually
If your login server IP address is not available in the "Select Your
State" drop-down menu
server IP address by placing a check in the box next to "User
decide login server manually" and type in the address next to
"Login Server"
(1)
, you may manually enter the login
(5)
.
49
49
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
