Table of Contents
Advertisement
Connecting and Configuring Your Router
Connecting and Configuring Your Router
Step 4
Configuring the Router
The Wizard will now transfer all of the configuration information to the
Router. This will take approximately one minute. During this time, do
not turn off the Router or computer. The Router will restart itself at the
end of this step.
3.3 Wireless Setup
This Step Is Optional. Click "Next" if
you want to skip it.
Using this step, you can customise
your wireless network settings if
you want to. Follow the steps on
the screen to complete this step.
Click "Next" to continue.
4.1 Checking Internet
The Wizard will now check for an
Internet connection. This can take
a few minutes. The Wizard may not
detect a connection right away. If
not, it will retry a number of times.
The "Connected" light on the front
panel of the Router will flash during
this time. Please be patient through
this process.
20
20
Advertisement
Table of Contents
