Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA)
security on a Belkin Wireless Router or Belkin Access Point for a
home network.
Solution:
1.
From the "Security Mode" drop-down menu, select "WPA-PSK
(no server)".
2.
For Encryption Technique, select "TKIP" or "AES". This setting
will have to be identical on the clients that you set up.
3.
Enter your pre-shared key. This can be from 8 to 63 characters
and can be letters, numbers, or symbols or spaces. This same
key must be used on all of the clients that you set up. For
example, your PSK might be something like: "Smith family
network key".
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
124
124
Advertisement
Table of Contents
