Belkin F5D5630au User Manual page 24

Manually Configuring your Modem-Router
Status
The Status page displays
ADSL status information.
Parameter Description
Line Status Shows the current status of the ADSL line.
Data Rate:
Upstream Actual and maximum upstream data rate.
Downstream Actual and maximum downstream data rate.
Operation Data/Defect Indication:
44
Manually Configuring your Modem-Router
Noise Margin:
Upstream Minimum noise margin upstream.
Downstream Minimum noise margin downstream. Maximum
fluctuation in the output power
Output Power Attenuation:
Upstream Maximum reduction in the strength of the
upstream signal.
Downstream Maximum reduction in the strength of the
downstream signal.
Fast Path FEC There are two latency paths that may be used: fast
Correction and interleaved. For either path a forward error
correction (FEC) scheme is employed to ensure
higher data integrity. For maximum noise immunity,
an interleaver may be used to supplement FEC.
Interleaved An interleaver is basically a buffer used to
Path FEC introduce a delay, allowing for additional error
Correction correction techniques to handle noise Interleaving
slows the data flow and may not be optimal for
real-time signals such as video transmission.
Fast Path CRC Indicates the number of Fast Path Cyclic
Error Redundancy Check errors.
Interleaved Indicates the number of Interleaved Path Cyclic
Path CRC Error Redundancy Check errors.
Loss of Signal Momentary signal discontinuities.
Defect
Loss of Frame Failures due to loss of frames.
Defect
Loss of Power Failures due to loss of power.
Defect
Fast Path HEC Fast Path Header Error Concealment errors.
Error
Interleaved Interleaved Path Header Error Concealment errors.
Path HEC Error
45
1
2
3
4
5
6
7