Table of Contents
Advertisement
CompanionLink Synchronization Instructions
On the PC
1.
Verify that the cradle is connected to the serial port.
2.
Turn on the PC.
3.
If running CompanionLink the first time, you need to select your
preferred settings. Select CompanionLink Settings by clicking
Programs and then CompanionLink on the PC Start menu.
4.
If you have set DVSync to automatically start when you log in to
your computer, DVSync should be running. To verify that DVSync
is running on your PC, look at the bottom right hand corner of your
PC screen. You should see a DVSync icon located in the system
tray near the area of the PC screen that shows the time of day.
5.
If you do not see the DVSync icon in the system tray, select
CompanionLink Synchronize by clicking Programs and then
CompanionLink on the PC Start menu. This will load DVSync
and you will see the icon in the system tray.
6.
A CompanionLink window will appear on your PC screen
instructing you to start synchronization from the daVinci.
On the daVinci
7.
Make sure that the unit is well placed into the cradle.
8.
Follow the instructions listed on the PC.
For more information about synchronization and troubleshooting
synchronization problems see appendix.
39
Hide quick links:
Advertisement
Table of Contents
