Pair Devices; Receive Data; Switch Off - Nokia N93 User Manual

5 When the connection has been established,
data is shown.
The Sent folder in Messag.
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address).
To find the unique address of your device, enter the
code *#2820# in the standby mode.

Pair devices

To open the paired devices view (
application main view, press
Before pairing, create your own passcode (1—16 digits) and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a
factory-set passcode. The passcode is used only once.
To pair with a device, select
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Sending
does not store messages sent
), in the Bluetooth
.
Options > New paired device.
in the device search.
Set as authorized—Connections between your device and
this device can be made without your knowledge. No separate
acceptance or authorization is needed. Use this status for
your own devices, such as your compatible headset or PC,
or devices that belong to someone you trust.
authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this device
must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Delete. If you want to cancel all pairings, select
Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately and the connection is switched off.

Receive data

When you receive data through Bluetooth connectivity, a
tone sounds and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messag.. Messages received
through Bluetooth connectivity are indicated by
See "Inbox—receive messages", p. 46.

Switch off

To switch off Bluetooth connectivity, select
indicates
Options >
Options >
is shown and the item is
.
Bluetooth > Off.
83