Troubleshooting; Q&A - Nokia N93 User Manual

Troubleshooting

Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP) or wireless service provider.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
Scroll to the application, and press
Bluetooth connectivity
Q: Why can't I find my friend's device?
A: Check that both devices have activated
Bluetooth connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in the hidden mode.
Check that both devices are compatible.
112
Q: Why can't I end a Bluetooth connection?
A: If another device is connected to your device, you can
Browser services
Q: What do I do if the following message is displayed:
A: Insert the correct browser settings. Contact your service
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic film covering the display
.
to close the application.
Q: Why is there audible noise from the camera when autofocus
A: Zoom and AF lens movement causes mechanical noise.
Q: Why do images or videos captured using night mode tend
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select
Bluetooth > Off.
access point defined. Define one in Services
provider for instructions.
and camera. Ensure that the camera lens protection
window is clean.
or optical zoom is used?
elect > >
S Options Settings
> to eliminate mechanical noise caused
recording Off
by lens movement when recording.
to be noisier under dark lighting conditions compared to
normal mode?
Connect. >
No valid
settings.?
Optical zoom during