Pair Devices - Nokia N90 Manual

Hide thumbs Also See for N90:
Table of Contents

Advertisement

Tip! If you have searched for devices earlier, a list
of the devices that were found previously is
shown first. To start a new search, select
devices. If you switch off the phone, the list is
cleared.
Device icons:
—Computer;
—Phone;
—Headset;
—Other.
To interrupt the search, press Stop. The device list
freezes.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices", p. 97.
5
When the connection has been established,
data
is shown.
The
Sent
folder in
Messaging
using a Bluetooth connection.
Tip! When searching for devices, some devices may
show only the unique addresses (device addresses).
To find the unique address of your phone, enter the
code *#2820# in the standby mode.
More
—Audio or video;
Sending
does not store messages sent

Pair devices

Glossary: Pairing means authentication. The users
of the two devices with Bluetooth technology
should agree on a common passcode, and use the
same passcode for both devices in order to pair
them. Devices that do not have a user interface have
a factory-set passcode.
In the
Bluetooth
main view, press
devices view (
).
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. The passcode is used only once.
To pair with a device, select
Devices with Bluetooth technology that are within range
start to appear on the display one by one. Select the
device, and enter the passcode. The same passcode must
be entered on the other device as well. After pairing, the
device is saved to the paired devices view.
Paired devices are indicated by
Tip! To define a short name (nickname or alias) for
a paired device, scroll to the device, and select
Options
>
Assign short name
view. This name helps you to recognise a certain
device during device search or when a device
requests a connection.
to open the paired
Options
>
New paired
device.
in the device search.
in the paired devices
97

Advertisement

Chapters

Table of Contents
loading

Table of Contents