Pair Devices; Receive Data Using Bluetooth Connectivity - Nokia XpressMusic 5800 User Manual

Hide thumbs Also See for XpressMusic 5800:
Table of Contents

Advertisement

computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
When the connection is established,
displayed.
Tip: When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter *#2820#.

Pair devices

Select
Menu
Settings
>
To pair with compatible devices and view your paired
devices, open the
Paired devices
Before pairing, create your own passcode (1 to 16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a factory-
set passcode. The passcode is used only once.
1. To pair with a device, select
device. Devices that are within range are displayed.
© 2008 Nokia. All rights reserved.
Sending data
and
Connectivity
> Bluetooth.
tab.
Options
New paired
>
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device, as well.
3. Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
accessory, select
Paired devices are indicated by
To set a device as authorised or unauthorised, select from the
following:
Set as authorised
and the authorised device can be made without your
knowledge. You will not be asked for authorisation or
acceptance separately. Use this status only for your own
is
devices, such as your compatible headset or PC, or devices
that belong to someone you trust.
devices in the paired devices view.
Set as unauthorised
device must be accepted separately every time.
To cancel a pairing with a device, select
To cancel all pairings, select

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
Options
Connect to audio
>
in the device search.
— Connections between your device
indicates authorised
— Connection requests from this
Options
Options
Delete
>
is displayed, and the item is
Connectivity
device.
> Delete.
all.
.
77

Advertisement

Table of Contents
loading

Table of Contents