Mazda3_8BY6-EA-11F_Edition1 Page433
Wednesday, June 15 2011 2:2 PM
Right side
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
Rear turn signal lights
(4 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
Form No.8BY6-EA-11F
Black plate (433,1)
Owner Maintenance
2. Pull the center of each plastic retainer
and remove the retainers and the trunk
end trim.
Removal
Installation
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
(5 Door)
1. Make sure the ignition is switched off
and the headlight switch is off.
Maintenance and Care
8-51