Mazda 3 Manual page 306

Mazda3_8BY6-EA-11F_Edition1 Page306
Wednesday, June 15 2011 2:2 PM
Interior Comfort
Bluetooth Audio
6. If the link to the desired device is
successful, the symbol is
displayed again, together with
LINK CHANGED .
LINK CHANGED is displayed for
three seconds, then it returns to the
normal display.
NOTE
Some Bluetooth audio devices need a
l
certain amount of time before the
symbol is displayed.
If a hands-free type mobile phone has been
l
the most recently programmed device, the
Bluetooth unit links this device. If you
would like to use a Bluetooth audio type
device which has been previously
programmed to the Bluetooth unit, the link
must be changed to this device.
If an error occurs while trying to link a
l
device, Err flashes in the display for
three seconds, and the display returns to
LINK CHANGE . If this occurs, check the
programming status of the Bluetooth audio
device and the location of the device in the
vehicle (not in the trunk or a metal-type
box), and then try the link operation again.
Device selection can also be done using
l
voice recognition (page 6-87).
How to confirm the device currently
linked
Switch to the link-change mode. (Refer to
Changing the link to a Bluetooth audio
device )
The device name displayed first is the
device which is currently linked.
6-68
Form No.8BY6-EA-11F
Black plate (306,1)
Deleting the link to a Bluetooth audio
device
1. Using the audio control dial, select the
pairing delete mode PAIR DELETE
in the BT SETUP mode. (Refer to
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the first device among the
programmed devices is displayed.
4. Rotate the audio control dial and select
the name of the programmed device
you would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of programmed devices can be
displayed. If only one device is programmed,
only the name for this device is displayed.