Mazda 3 Manual page 339

Mazda3_8BY6-EA-11F_Edition1 Page339
Wednesday, June 15 2011 2:2 PM
qClock
The time is displayed when the ignition is
switched to ACC or ON.
Time setting
Refer to Clock on page 6-98.
Time resetting
Refer to Clock on page 6-98.
With navigation system
Time zone switching
1. Press the INFO switch until the
SETTINGS screen is displayed.
2. Select PREFERENCES by pressing the
Enter (up/down) switch up or down,
and then press the Enter (up/down)
switch.
3. Select TIME ZONE by pressing the
Enter (up/down) switch up or down,
and then press the Enter (up/down)
switch.
4. Select the desired time zone by
pressing the Enter (up/down) switch up
or down, and then press the Enter (up/
down) switch.
Form No.8BY6-EA-11F
Black plate (339,1)
Interior Equipment
NOTE
Daylight saving time is not reflected in the
l
time zone displayed.
The clock does not display if there is no
l
GPS signal reception.
If the battery cables are disconnected and
l
then reconnected, the clock does not
operate until a GPS signal is received. Do
not place objects on the dashboard,
otherwise the clock may be unable to
receive the GPS signal normally.
qOutside Temperature Display
When the ignition is switched ON, the
ambient temperature is displayed.
NOTE
Under the following conditions, the ambient
l
temperature display may differ from the
actual ambient temperature depending on
the surroundings and vehicle conditions:
Significantly cold or hot temperatures.
l
Sudden changes in ambient temperature.
l
The vehicle is parked.
l
The vehicle is driven at low speeds.
l
When the ignition is switched to ACC,
l
- - - is displayed.
Interior Comfort
6-101