Mazda 3 Manual page 342

Mazda3_8BY6-EA-11F_Edition1 Page342
Wednesday, June 15 2011 2:2 PM
Interior Comfort
Interior Equipment
qMaintenance Monitor
The maintenance monitor notifies the
driver when the periodic inspection and
tire rotation periods are due. The
maintenance monitor displays the
information when the ignition is switched
to ACC or ON.
NOTE
This function is inoperable while the
l
vehicle is being driven.
(With navigation system)
l
If the battery cables are disconnected and
then reconnected, the SERVICE DUE item
in the MAINTENANCE setting cannot be
done until the clock resets after receiving a
GPS signal. Perform this setting after the
clock resumes operation.
Initial setting method
1. Press the INFO switch until the
SETTINGS screen is displayed.
2. Select MAINTENANCE by pressing
the Enter (up/down) switch up or
down, and then press the Enter (up/
down) switch.
3. Select the item you want to turn on
(TIRE ROTATION or SERVICE DUE)
by pressing the Enter (up/down) switch
up or down, and then press the Enter
(up/down) switch.
6-104
Form No.8BY6-EA-11F
Black plate (342,1)
4. Press the Enter (up/down) switch.
5. Select SET and press the Enter (up/
down) switch.
NOTE
For the service due notification, either the
l
number of days or distance can be set.
When selecting one of the two settings, the
setting not selected is set to the initial value
automatically.
Because tire rotation can only be set
l
according to distance, the screen for setting
distance is displayed when SET is selected.
6. Select DISTANCE or DAYS and press
the Enter (up/down) switch. The screen
for setting the distance or days to the
next maintenance period is displayed.