Setting Up Wpa2-Psk Security - NETGEAR RangeMax Next WN711 User Manual

4. Select the Create with Passphrase radio button, and enter the passphrase. The configuration
utility automatically generates the WEP keys.
Note: The characters are case-sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11n, 802.11b, or 802.11g
wireless devices.
5. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.

Setting up WPA2-PSK Security

Follow these steps to configure WPA2-PSK s
1. Run the Smart Wizard.
a. Make sure that the NETGEAR software is installed and that the Wireless Express Card is
fully inserted in the Express Card slot in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
Figure 2-16
2. Configure the security settings.
a. In the Profile field, select the profile, or type in a profile name.
NETGEAR RangeMax Next Wireless-N ExpressCard WN711 User Manual
v1.0, March 2008
2-17