Profiles - NETGEAR RangeMax Next WN711 User Manual

You are prompted to either enter the router PIN or generate a new PIN.
Figure 2-9
4. Select the radio button to generate a PIN, and then click Next. Write down (or copy) the PIN.
5. On the access point or router that you have selected, open its Smart Wizard or configuration
utility.
6. Select Add WPS Client. On the Add WPS Client screen, select PIN.
7. Within 4 minutes, enter the PIN in the client's PIN field on the router Add WPS Client screen,
and then click Next. The Smart Wizard initiates your wireless connection.
8. You can use the Status Bar to verify your network connection. For more information, see
"Smart Wizard Status Bar" on page
9. Close the Smart Wizard for the access point or router.

Profiles

The WN711 Smart Wizard uses profiles to store all the settings for a particular wireless network.
There are two special profile names: Default and Profile.
• Default. The Profile named Default automatically scans for any available network. You
cannot change this profile name.
• Profile. If you do not enter a name in the Profile Name field, then the name Profile is used to
save your settings. If you do this more than once, you are asked if you want to replace the
previous settings stored in Profile.
NETGEAR RangeMax Next Wireless-N ExpressCard WN711 User Manual
1-8. Click Close to exit the Smart Wizard.
v1.0, March 2008
2-9