a. In the Profile field, select the profile, or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the SSID that you
c. In the Security section of the screen, select WPA-PSK [TKIP].
For more information about wireless security, see the link to the online document
"Wireless Networking Basics" in Appendix B.
3. Save your settings in a profile.
a. Click Save Profile. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Advanced Settings
The default Advanced settings usually work fine. To view them, click the Advanced Settings
button on the Settings tab. Changing these settings is recommended only for advanced users who
have a specific reason to adjust them. Use the Help button to understand these options.
Figure 2-18
NETGEAR RangeMax Next Wireless-N ExpressCard WN711 User Manual
enter exactly matches the SSID used by the access point.
v1.0, March 2008
2-19