iRobot Verro 100 Owner's Manual page 24

Troubleshooting
Problem
Verro reverses
direction before
reaching end of pool
or
Verro waits too long
at side of pool before
changing direction
Verro does not
reverse direction
Verro is not
vacuuming well

iRobot Verro Owner's Manual
(cont...)
likely Cause
The filter bag needs to
be cleaned
Flaps in the vacuum
intakes at bottom of
robot are blocked
Wheels or axles are not
turning freely
The pump propeller is
fouled by dirt or debris
Locking pin position may
be causing too sharp/
narrow of a turn
The direction flap is
impeded
The filter bag needs to
be cleaned
Flaps in the vacuum
intakes at bottom of
robot are blocked
The pump propeller is
fouled by dirt or debris
what to Do
Clean the filter bag. (p. 15)
Check the flaps in the vacuum intakes.
(p. 22)
Check wheels and axles for dirt
and debris.
Clean the pump propeller. (p. 20)
Change locking pin position to lessen/
increase degree of turn movement.
Check the direction flap. (p. 22)
Clean the filter bag. (p. 15)
Check the flaps in the vacuum intakes.
(p. 22)
Clean the pump propeller. (p. 20)