Maintenance And Adjustment - iRobot Verro 100 Owner's Manual

Maintenance and Adjustment

(cont...)
Checking the Flaps in the Vacuum Intakes
There is a flap just inside each vacuum intake at the bottom of the robot.
These flaps must freely open and close. If they do not, remove any dirt or
debris that is interfering with their operation.
Cleaning the Direction Flap
Verro uses a flap to redirect the flow of water so that it can move forward and
backward. If this flap becomes fouled or clogged, Verro will not be able to
change direction.
To clean the direction flap, direct a high-pressure jet of water from a hose into
the jet valve port. It may be helpful to remove the jet valve port (see Cleaning
the propeller, above) in order to see the direction flap. Check to make sure
that when pressed from either direction, it moves towards that direction freely.

iRobot Verro Owner's Manual