(SECTION SEVEN: Customizing the Evolution 202 continued)
Menu Functions
AC Mains
This function enables you to operate the Evolution 202 from a switched AC outlet.
If AC Mains is set to
by. Thereafter, you may switch the preamplifier to and from stand-by, using the
power button or pwr key (1). The options are:
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
2.
Press the enter button on the preamplifier front panel or the enter key (6) on the
remote control
3.
Use the level control knob or the up and down keys to select the desired
option:
or
OFF
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
AC MAINS.
OFF
The Evolution 202 switches to stand-by mode, when it detects AC power.
ON
The Evolution 202 turns on immediately, bypassing the stand-by mode, when it
detects AC power.
the preamplifier turns on immediately, by-passing stand-
ON,
AC MAINS.
The front panel display (3) shows the default mode:
.
ON.
30
OFF, ON.
OFF
.