Download Print this page

Unpacking / Placement / Ac Power Guidelines - Krell Industries K-300p Owner's Reference Manual

Advertisement

K-300p Owner's Reference

Unpacking / Placement / AC Power Guidelines

Open the shipping box and remove the top layer of foam. You will see these items:
K-300p unit and Accessories - Included
1 - AC power cord
1 - Owner's Reference
1 - Warranty Registration Card
Place the K-300p on a firm, level surface, away from excessive heat, humidity, or moisture. The K-
300p is a precision instrument and should be handled with the utmost care. Make sure the
installation location is dry and level, and able to provide adequate ventilation. The bottom of the K-
300p must be unobstructed to the height of the feet to ensure proper ventilation. Do not place the K-
300p on a carpeted floor. Allow a minimum of 2 inches (5cm) above the unit for proper ventilation,
and at least one inch (2.54 cm) on each side. Additional ventilation may be required when the unit
occupies the same space with other electronics that generate heat, like power amplifiers. Please
consult an authorized KRELL dealer or KRELL Industries to ensure proper installation.
The K-300p is a high gain preamplifier. As such it may pick up unwanted noise from the power
supply of another unit such as a power amplifier. This should be considered when locating the K-
300p.
The K-300p is designed to work all over the world. The K-300p requires good clean power and
doesn't require additional filtration.
Note:
Save all packing materials; if you need to ship the K-300p in the future, repack the unit in its
original packaging to prevent shipping damage.
Recommended Cleaning Instructions for Krell Products
Clean your Krell product gently, using a high quality lint-free cloth that has not been treated with
chemicals of any kind. Please note the following: Do not use cleaning agents of any kind, such as
alcohol, Windex, or other common cleaning products. Water may be used but do not spray directly
onto the unit, instead a small amount may be used on a lint-free cloth to lightly rub the exterior of the
unit.
Thank you.
© 2022 by Krell Industries LLC. All rights reserved.
Page 4 of 10

Advertisement

loading