Navigation Conventions - Krell Industries Evolution 202 Owner's Reference Manual

SEVEN
SECTION
Customizing the Evolution 202
The Evolution 202 Preamplifier easy-to-use menu allows you to configure the fol-
lowing functions. You can also use the menu to review version information about
the software, hardware, and firmware installed in the Evolution 202:
AC Mains,
page 30
Balance (channel)
Balance (input trim),
Display,
page 32
Info,
page 33
Input Level Trim,
Input Name,
page 34

Navigation Conventions

Navigating the Evolution 202 menu is straightforward and consistent throughout,
using four functions and the menu option
5 Menu Button or Key
To enter the menu, press the menu button on the preamplifier front panel or the
menu key on the remote control. Once you are in the menu, you can press the
menu button or key to exit the menu.
14 Volume Knob or Level Keys
Use the volume knob on the preamplifier front panel or the up and down keys on
the remote control to scroll forward and backward through the menu hierarchy.
Each menu list is a continuous loop.
6 Enter Button or Key
Press the enter button on the preamplifier front panel or the enter key on the
remote control to select a function or a configuration option, and to confirm a
selection.
3 Front Panel Display
The display shows the active function and configurable options.
BACK
Select back to scroll backwards up the menu hierarchy, or to exit a menu option
without confirming it.
The first list you see in the menu is the list of configurable functions. Select a con-
figurable function to view a submenu: the list of options that configure the func-
tion. You can configure some options as well, using a second submenu.
Input Phase,
Input Trigger,
page 31
IR Out Control,
page 31
Link Control,
Mute,
page 37
Output Trigger,
page 34
RC-5 Control,
29
Recall,
page 35 page 39
RS-232 Control,
page 35
Save,
page 36 page 40
Theater Mode,
page 37
Volume Display,
page 38
page 39
BACK.
page 40
page 41
page 42
continued