Winding The Bobbin - Baby Lock Grace A-Line Series BL40A Quick Reference Manual

1. Place the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the notch
in the bobbin.
2. Slide the bobbin winder shaft to the right until it snaps into place.
3. Fully insert the spool of thread for the bobbin onto the spool pin. Slide the spool onto the pin
so that the spool is horizontal and the thread unwinds to the front at the bottom.

Winding the Bobbin

1 Hook for the bobbin-winding thread guide
2 Pretension disk
3 Bobbin winder shaft
4 Bobbin
1 Notch
2 Bobbin winder shaft spring
1