Grundig GDR730DABSOL Manual page 26

Gener8 Series
System Setup System Setup
Setting the Backlight Level
1. In the System Menu you will be able to select Backlight option. To change these settings press the SELECT
Knob to confirm.
2. Once in the Backlight Menu, turn the SELECT Knob to select the Backlight level you desire to be displayed
during On mode. Press the SELECT Knob to confirm.

Note: a. You can choose between 'High', 'Medium' and 'low'.
b. A High Backlight will allow you to view the information easily and will provide you with the maximum light level.
c. A Medium Backlight will still give you a good level of light but will use less power than the high level.
d. A Low Backlight is the dullest option of the three. It will also use the least amount of power.
Setting the Backlight Level for Standby Mode

Note: Standby Mode is available when the unit is off but is still connected to main power supply.
To set the Backlight level for Standby Mode, turn the SELECT Knob until „Standby Level‟ is displayed on screen.
Then follow the same steps as above.
Setting the Language Option
1. In the System Menu turn the Select Knob to select the Language Menu. Press the SELECT Knob to confirm.
2. Once in the Language Menu, turn the SELECT Knob to select your desired setting. Press the SELECT Knob to
confirm.


26