Grundig GDR730DABSOL Manual page 14

Gener8 Series
Using DAB+ Radio
Conducting a Manual Scan
1. Press the
2. Press the SELECT Knob to confirm, the display will show the channel number and frequency list.
3. Turn the SELECT Knob to scroll through the channels and press the SELECT Knob once you have found the
radio channel you wish to listen to.

Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a tuning meter with the
signal strength and the multiplex name after a few seconds.
4. Press the
How to Set the DRC (Dynamic Range Control)
You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.

Note: Setting the DRC to off indicates no compression, setting the DRC to low indicates little compression and setting
the DRC to high shows maximum compression.
1. Press the
Button and then turn the SELECT Knob until you see Manual Tune on the display.
Button to exit this order.
Button and then turn the SELECT Knob until the DRC menu is displayed on screen.
14