Samsung NP-Q1UA000 Getting Started Manual page 198

3
If you fail to find your symptom using
Select by Symptom, close the Select
by Symptom screen and click Restore
from the main menu.
4
Select either Basic Restore
or Complete Restore from the
Restoration menu.
5
If you have selected Basic Restore,
and you click the Next button, the
system is restarted and boots up in
restoration mode.If you have selected
Complete Restore, select a restoration
point, and then click the Next button.
The system is restarted in restoration
mode.
The first time the computer boots up
after a Complete Restore has been
performed, the boot speed may slow
down due to the system optimization
process.
Available restoration points for
the Complete Restore function
In the Complete Restoration
function, you can select either
Factory Status Backup or User
Backup. If you have not created
a User Backup, you cannot select
User Backup.
When the computer boots up in
restoration mode, the restoration
progress message appears. If you
click OK,
the restoration is performed. When
the 'Restart the System' message
appears after the restoration is
complete, click OK to restart the
system.
198