Features And Capabilities - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

Overview
1

Features and Capabilities

The following list provides an overview of the system's features:
Full line of system phones, some with displays showing date, time, and
programming and feedback messages. All system phones provide
access to multiple outside lines and system features.
Programmable buttons on system phones, providing one-touch access to
system features simply by pressing the button.
Intuitive operation of basic call handling capabilities including transfer,
conference, and hold.
Intercom (inside) calling to other system extensions using an Intercom
button and the two-digit number assigned to the extension. Users can
either ring or voice signal an idle system phone; use Voice Interrupt On
Busy to signal another user who is active on a call; or manually signal to
audibly alert another predetermined extension.
Grouping of extensions for flexibility in directing and answering calls.
Integrated voice messaging support with the PARTNER MAIL VS system
or PARTNER MAIL system, so callers can reach a desired extension or
group without operator assistance and leave messages at unanswered or
busy extensions.
Caller ID support on system display phones (if Caller ID service is
available from your local telephone company and you subscribe to it).
Power failure operation with standard phones, allowing you to make and
receive calls during a power failure while retaining programmed
equipment settings for up to four days. (An optional Uninterruptible
Power Supply, or UPS, is also available to allow full equipment operation
during a power failure.)
Centrex or PBX operation support—including one-touch dialing of feature
access codes on system phones.
1-1
Overview