Integrated Peripherals - Gigabyte GA-H67A-D3H-B3 User Manual

Hide thumbs Also See for GA-H67A-D3H-B3:
Table of Contents

Advertisement

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
eXtreme Hard Drive (XHD)
PCH SATA Control Mode
SATA Port0-3 Native Mode
USB Controllers
USB Legacy Function
USB Storage Function
Azalia Codec
Onboard H/W LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard USB 3.0 Controller
Onboard Serial Port 1
hi: Move
Enter: Select
F5: Previous Values
eXtreme Hard Drive (XHD) (Intel H67 Chipset)
Enables or disables the X.H.D function for the SATA controllers integrated in the Intel H67 Chipset.
When set to Enabled, the PCH SATA Control Mode item below will be set to RAID(XHD) automatically.
For details on using the GIGABYTE X.H.D utility, refer to Chaper 4, "eXtreme Hard Drive (X.H.D)." (Default:
Disabled)
PCH SATA Control Mode (Intel H67 Chipset)
Enables or disables RAID for the SATA controllers integrated in the Intel H67 Chipset or configures the
SATA controllers to AHCI mode.
IDE
D isables RAID for the SATA controllers and configures the SATA controllers to IDE
mode. (Default)
RAID(XHD)
Enables RAID for the SATA controllers.
AHCI
C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
SATA Port0-3 Native Mode (Intel H67 Chipset)
Specifies the operating mode of the integrated SATA controllers.
Disabled
Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with
other device. Set this option to Disabled if you wish to install operating systems that
do not support Native mode.
Enabled
Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support Native
mode. (Default)
USB Controllers
Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
Integrated Peripherals
[Disabled]
[IDE]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[Enabled]
[3F8/IRQ4]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 45 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents