Direct Voice Mail - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Direct Voice Mail

Direct Voice Mail
At a Glance
Users Affected
Reports Affected
Modes
Telephones
MLX Display Label
Programming Code
Feature Code
Description
Direct Voice Mail allows you to place or transfer a call directly to another person's
voice mail without ringing that person's telephone.
You can either transfer an active call to an extension's voice mail or place an
intercom call directly to the extension's voice mail. Activating Direct Voice Mail
while on hook selects the next available SA or ICOM button (at least one SA or
ICOM button must be available). To activate Direct Voice Mail, do one of the
following:
Press the programmed Direct Voice Mail button and press a DSS button or
Auto Dial button, or select a Directory entry for the extension.
Press the programmed Direct Voice Mail button and dial the extension
number.
Press the Feature button, select
extension number.
For a single-line telephone only:
— If active on a call, press the Flash or Recall button (or if your telephone
— If you hear dial tone, dial
On display telephones, the display shows the message
before the extension is selected or dialed.
The green LED associated with the Direct Voice Mail button lights when the
feature is activated. The LED turns off when the feature is deactivated (by
pressing the Direct Voice Mail button again) or when the call or transferred call
has gone to voice mail.
Telephone users, operators
Extension Directory
Hybrid/PBX, Key
All
Direct VM [DrcVM]
*56
56
does not have positive disconnect, press and release the switchhook).
Then dial followed by the extension number.
#56
1 7
1 7
1 7
[
Direct VM DrcVM
followed by the extension number.
#56
Issue 1
June 1997
Page 215
], and dial the
Send Voice Mail to: