Signaling And Notify - AT&T MERLIN LEGEND MLX-10 Non-Display Telephone User Manual

Features

Signaling and Notify

In addition to calling directly, there are two other ways to use
the phone to contact your co-worker, Use Signaling to beep or
use Notify to turn on a light on a co-worker's phone.
Signaling. To use Signaling, program a Signal button. You
can signal your co-worker without lifting your handset. Your
co-worker's phone beeps for as long as you hold down the
button.
You can use Signaling even when you and/or your co-worker
are on the phone. The green light next to your Signal button
shows when your co-worker is on the phone or using Do Not
Disturb. (Do Not Disturb prevents Signaling.)
If you have already programmed an Auto Dial button for a
co-worker, do not program a Signal button for that extension.
Instead, reprogram that Auto Dial button as a Signal button.
Then, when you need to call, lift the handset or press Speaker,
and press the Signal button to automatically dial the extension.
Notifying. To use Notify, program a Notify Send button on
your phone and a Notify Receive button on your co-worker's
phone, or program a Notify Receive button on your phone
and a Notify Send button on your co-worker's phone
(both buttons must be programmed). When you press the
Notify Send button, the green light next to your co-worker's
Notify Receive button goes on to show that you want to talk.
Signaling and Notify
5-49