AT&T MERLIN LEGEND MLX-10 Non-Display Telephone User Manual page 58

Features
To Set Up a Conference Call
1. Make call to first outside number or extension.
Press Conf after person answers.
2.
The green light next to the line button flashes to signal that the person is
on hold for the conference.
To make next call, press an ICOM or SA button for an inside call
3.
or an SA or line button for an outside call.
4.
Dial number or extension; after the person answers, press Conf.
See Note.
All partlicipants, including you, are connected.
Press Conf again to add another person.
5.
You are separated from the conference while you add the next person,
but participants are still able to talk.
Repeat steps 3, 4, and 5 for rest of
6.
7. To end conference, hang up.
Note: If you make a dialing error while adding a participant to
a conference, you must hang up and start over.
T Leave a Conference Temporarily
O
1. Press Hold.
Conference participants are still able to converse.
2. To rejoin conference, press line button of any conference
participant.
To Drop a Conference Participant
1. Press Drop.
2. Press line button of any conference participant. See Note.
Note: Drop does not work when the conference is on hold.
5-12
C o n f e r e n c e