Sound Blaster Audigy 2 Platinum Ex External I/O Module; Inputs And Outputs On Front Panel; Inputs And Outputs On Rear Panel - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Sound Blaster
Audigy 2 Platinum
eX External I/O
Module
Inputs and outputs on
front panel
Inputs and outputs on
rear panel
❑ One headphone output with auto detection via ¼" stereo jack with volume control
❑ One shared line-level analog Line/Microphone input (Line-In 1/Mic-In) via ¼"
stereo jack. Shared input selectable via knob. Gain/level control for microphone
❑ One standalone line-level analog input (Line-In 2)
❑ Two optical connectors for optical SPDIF input and output
❑ One SB1394/FireWire connector for IEEE1394 compatible devices
❑ One infrared receiver for receiving information from the remote control.
Transmission range within 4 meters with 15-degree deviation from the center
axis.
❑ One AD_LINK 1 connector for linking to the audio card
❑ One AD_LINK 2 connector for power supply to the Sound Blaster Audigy 2
Platinum eX External I/O Module
❑ 1 x standard MIDI OUT and 1 x standard MIDI In jack for MIDI instruments
❑ Two SB1394/FireWire ports to connection to IEEE1394 compatible devices
❑ One Mini-DIN SPDIF digital output
❑ Two RCA jacks for Auxiliary Line Input (Line-In 3)
❑ Two RCA connectors for coaxial SPDIF input and output
General Specifications A-5