Creative Sound Blaster Audigy 2 Platinum eX User Manual page 17

Click here or on any
description to return to the
diagram of the Sound Blaster
Audigy 2 Platinum eX card.
Table 1: The Sound Blaster Audigy 2 Platinum eX card
Number
1 Joystick/MIDI connector
Connects to the Joystick/MIDI bracket for gamepads, other input
and MIDI devices.
2 AD_LINK 2 connector
Connects to the Audigy 2 Platinum eX External I/O Module's
AD_LINK2 port to supply power.
3 AD_LINK 1 connector
Connects to the External I/O Module for transferring data.
4 Line Out 3 jack
Connects to Front Center, subwoofer and Rear Center inputs of
powered analog speakers or an external amplifier.
5 Line Out 2 jack
Connects to Rear Left/Right analog inputs of powered analog
speakers or an external amplifier. Also supports headphones.
6 Line Out 1 jack
Connects to Front Left/Right analog input of powered analog
speakers or an external amplifier for audio output. Headphones
can also be connected to this jack.
7 Power connector
Connects to a small four-pin power connector found on the
supplied power converter cable.
Description
About your Sound Blaster Audigy 2 Platinum eX hardware 1-4