Sound Blaster Audigy 2 Feature Showcase Demo; Uninstalling And Reinstalling The Applications And Device Drivers; Reinstalling All Audio Drivers And Applications - Creative Sound Blaster Audigy 2 Platinum eX User Manual

Sound Blaster
Audigy 2 Feature
Showcase Demo
Uninstalling and
Reinstalling the
Applications and
Device Drivers
Reinstalling all Audio
Drivers and
Applications
1. Insert the Sound Blaster Audigy 2 Feature Showcase Demo CD into your CD-ROM
drive.
If the drive supports Windows AutoPlay mode, the CD starts running
automatically. If not, you need to enable your CD-ROM drive's auto-insert
notification feature. For more details, see "Problems Installing Software" on page
B-1.
2. Follow the instructions on the screen to complete the installation, and to run the
Demo.
At times you may need to uninstall or reinstall some or all of the audio card's
applications and device drivers to correct problems, change configurations, or
upgrade outdated drivers or applications. The following instructions tell you how to
do so in all Windows operating systems.
Before you begin, close all audio card applications. Applications that are still
running during the uninstallation will not be removed.
If you are experiencing problems with the Audigy 2 device drivers or application, you
may want to reinstall all of them. To do so:
1. Click Start -> Settings -> Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click the Install/Uninstall tab or the Change or Remove Programs button.
4. Select the Sound Blaster Audigy 2 entry, and then click the Add/Remove (or
Change/Remove) button.
5. In the InstallShield Wizard dialog box, select the Repair button, and then click
the Next button. If prompted, insert the Sound Blaster Audigy 2 Installation and
Applications CD into your CD-ROM and click the OK button.
6. Click the Yes button.
Installing Software 3-2