Getting Started - AT&T MERLIN 820 Installation Manual

Getting Started

This guide assumes the tasks on the following list have been completed. Review
the list carefully. If you have not completed the tasks on the list, you should do
so now.
Check the items in your shipment against your copy of the order form.
Make sure the items and quantities agree. Save the instructions that come
with each component, and also keep the packing boxes just in case you
have to return components under warranty.
Get acquainted with the system environment.
Review the planning sheets you drew up when you ordered the system.
Confirm the voice terminal and control unit locations, and make sure the
control unit location meets the following environmental standards:
— Operating temperatures: 40 to 104°F (4 to 40°C).
— Humidity: not to exceed 80%.
— Ventilation: Leave 6 inches of space above and to the sides of the
control unit. Keep the control unit away from sources of extreme heat
(furnaces, heaters, attics, or direct sunlight). Do not stack multiple
control units in rooms that are not air-conditioned; install them side
by side at least 6 inches apart.
— Airborne contamination: Do not expose the control unit to moisture,
corrosive gases, dust, chemicals, or similar substances.
If the control unit location does not meet these standards, your warranty
may become void.
3