Gigabyte GA-P55A-UD3P User Manual page 43

tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
B2B CAS Delay
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration
CPU Vcore
x Dynamic Vcore (DVID)
QPI/Vtt Voltage
>>> MCH/ICH
PCH Core
CPU PLL
>>> DRAM
DRAM Voltage
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf : Move Enter: Select
F5: Previous Values
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU
voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel
specifications. (Default: Auto)
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the
CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Voltage Settings
Normal
1.25625V
+0.00000V
1.100V
1.050V
1.800V
1.500V
0.750V
0.750V
0.750V
0.750V
0.750V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Current
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
F10: Save
- 43 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup