Gigabyte GA-P55A-UD3P User Manual page 107

For the JMicron JMB362:
Insert the floppy disk containing the SATA RAID/AHCI driver and press <S>. Then a controller menu similar
to Figure 3 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press
<Enter>.
Windows Setup
ENTER=Select
For the Marvell 9128:
Insert the floppy disk containing the SATA AHCI driver and press <S>. The screen will display two drivers,
both of which need to be installed (Figure 4). First select Marvell shared library (install first) and press
<Enter>. On the next screen, press <S> to return to the screen in Figure 4. Then select Marvell 91xx SATA
Controller 32bit Driver and press <Enter>. When both of the two drivers appear on the confirmation screen,
press <Enter> to continue the driver installation.
Windows Setup
ENTER=Select
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32)
F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Marvell shared library (install first)
Marvell 91xx SATA Controller 32bit Driver
F3=Exit
Figure 3
Figure 4
- 107 - Appendix