dbx DriveRack PA User Manual page 14

Section 1
Input Setup
Select Input as MONO
or STEREO.
>STEREO
Auto EQ
Connect mic to RTA
input. Press RTA
input button.
Graphic EQ Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
AFS
Please turn down the
mixer gain. Press
NEXT PG when done.
Auto EQ
RTA INPUT
must be pressed.
Main Speaker
Select Main PA
JBL SRX
AFS
>SR4702X Passive
Select Number of
fixed filters. > 6
F F F F F F L L L L L L
Auto EQ
Mic Level
Turn Up Level
Pink Level > 18dB
Sub Speaker
Select Sub PA
>None
AFS
Select fixed type
> Speech
L R
Auto EQ
High Amplifier
Slowly Increase the
Select an amplifier
mixer gain to
desired level.
>Crwn MacroTech 1202
F F F F F F L L L L L L
Auto EQ
Mic Level
Turn Up Level
Pink Level > 18dB
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
AFS
>0.775 Volts
Fixed Filter Setup
Done
F F F F F F
: Pink Noise
A
6
DriveRack
E
u
Q
t
o
RESPONSE
Getting Started
• Simply rotate the <DATA> wheel to select either a Dual Mono or Stereo linked 28-band
Graphic EQ. Once you have selected your EQ option, press the <NEXT PG> button and
the display will appear as follows:
• Rotate the <Data> wheel to select any one of the numerous custom-tuned MAIN speaker
options available. If the speaker being used is not specified in the menu, select CUSTOM.
Warning
Once you have selected your Main speaker option, press the <NEXT PG> button and the
display will appear as follows:
button
• Rotate the <Data> wheel to select any one of the numerous custom-tuned SUB speaker
options available. Once you have selected your SUB speaker option, press the <NEXT PG>
: Pink Noise
button and the display will appear as follows:
• You are now prompted to select a power amp by rotating the <DATA> wheel to select any
one of the numerous custom-tuned Amplifier options available. Note that the top line of the
display will either read High, Mid or Low depending on your selected speaker setup selec-
tions. Once you have selected your Amp tuning option (depending on the amp type), you
will select the specified amplifier sensitivity setting if applicable.
• Rotate the <DATA> wheel to select the amplifier manufacturer's specified amplifier sensitivity
: Pink Noise
setting. Once set, press the <NEXT PG> button, and you will now be given the option of
optimizing your amp levels with the DriveRack PA. The page will appear something like this:
L L L L L L
® PA User Manual
C PRECISION LOW
Graphic EQ Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
Auto EQ Warning
RTA INPUT button
must be pressed.
Main Speaker
Select Main PA
JBL SRX
>SR4702X Passive
AFS
Select Number of
fixed filters. > 6
F F F F F F L L L L L L
Auto EQ : Pink Noise
Mic Level
Turn Up Level
Pink Level > 18dB
Sub Speaker
Select Sub PA
AFS
>None
Select fixed type
> Speech
L R
Auto EQ
High Amplifier
Select an amplifier
>Crwn MacroTech 1202
Slowly Increase the
mixer gain to
desired level.
F F F F F F L L L L L L
Auto EQ : Pink Noise
Mic Level
Turn Up Level
Pink Level > 18dB
High Amplifier
AFS
Select Sensitivity
Fixed Filter Setup
Crwn MacroTech 1202
Done
>0.775 Volts
F F F F F F L L L L L L
A
E
u
Q
t
o
RESPONSE C PRECISION
High Amp Level
Adjust level
same as your amp
>25
DriveRack
Main Speaker
Select Main PA
JBL SRX
>SR4702X Passive
Auto EQ : Pink Noise
Mic Level
Turn Up Level
Pink Level > 18dB
Sub Speaker
Select Sub PA
>None
AFS
Select fixed type
> Speech
L R
Auto EQ
High Amplifier
Select an amplifier
Slowly Increase the
>Crwn MacroTech 1202
mixer gain to
desired level.
F F F F F F L L L L L L
Auto EQ : Pink Noise
Mic Level
Turn Up Level
Pink Level > 18dB
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
>0.775 Volts
AFS
Fixed Filter Setup
Done
F F F F F F L L L L L L
A
E
u
Q
t
o
RESPONSE C PRECISION
High Amp Level
Adjust level
same as your amp
>25
LOW
Low Amp Bridging
Select
same as your amp
>Normal
®
PA
Sub Speaker
Select Sub P
>None
L R
Auto EQ
High Amplifie
Select an amp
>Crwn MacroTe
Slowly Incr
mixer gain
desired lev
F F F F F F
Auto EQ
Mic Level
Turn Up Lev
Pink Level
High Amplifier
Select Sensitiv
Crwn MacroTech
AFS
>0.775 Volts
Fixed Filt
Done
F F F F F F
A
E
u
Q
t
o
High Amp Level RESPONSE
Adjust level
same as your amp
>25
LOW
Low Amp Bridgi
Select
same as your a
>Normal
®
®
®
: P
C PRECI