dbx DriveRack PA Specifications

SPECIFICATIONS
Front
Rear
Analog Inputs:
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA
Mic input
Type: Electronically balanced/RF filtered
Impedance: > 40k Ω
Max input line level: +20dBu
CMRR: > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -110dBu, 22Hz-22kHz, 150Ω
Analog Outputs:
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120 ohms
Max Output Level: +20dBu
dbx Professional Products • 8760 South Sandy Parkway • Sandy UT 84070 • Phone (801) 568-7660 • Fax (801) 568-7662
Int'l Fax (801) 568-7583 • email: customer@dbxpro.com • URL: http://www.dbxpro.com
Crown and JBL are registered trademarks of their respective companies
Int'l Fax (801) 568-7583 • email: customer@dbxpro.com • URL: http://www.dbxpro.com
A/D Performance:
Type: dbx Type IV conversion system
Dynamic Range line: 110 dB A-weighted, 107 dB
unweighted
Type IV dynamic range: 123 dB with transient material, A-
weighted, 22kHz BW 121 dB with
transient material, unweighted, 22kHz
BW 115 dB typical with program mate-
rial, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A Performance:
Dynamic Range: 112 dB A-weighted, 110dB unweighted
System Performance:
Dynamic Range: 110 dB unweighted, >107dB weighted,
THD+N: 0.002% typical at +4dBu, 1kHz, 0dB
input gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >110dB, 120dB typical
Crosstalk input to output: >100dB
Delay: 10ms per output (60 ms total)
Featuring
Custom Tunings
DriveRack
Complete Equalization and
Loudspeaker Control System
18-0076-A
™
PA
The Cure for
the Common PA
The Professional's Choice In Signal Processing
www.dbxpro.com