Remote Keyless Entry; Lock Doors; Transmitter Battery Replacement - Chery TIGGO User Manual

Hide thumbs Also See for TIGGO:
Table of Contents

Advertisement

18 – BEFORE OPERATING YOUR VEHICLE
CAUTION!
Always remove the key from the vehicle
and lock all doors when leaving the ve-
hicle unattended.

Remote Keyless Entry

This system allows you to lock or un-
lock the doors remotely using the key
transmitter.
Vehicle Key
To Lock the Doors
Press and release the LOCK button on
the transmitter to lock all doors.
NOTE: Transmitter and receivers must
be certified to conform to specific regula-
tions in each individual country. Opera-
tion is subject to the following two condi-
tions:
• The device cannot cause harmful in-
terference.
• The device must accept any interfer-
ence received, including interference
that may cause undesired operation.
If your key transmitter fails to operate
from a normal distance, check for these
two conditions:
• Weak batteries in the transmitter (the
expected life of the transmitter battery
is a minimum of three years).
• Radio transmitter interference, such
as a radio station tower, airport trans-
mitter, and some mobile or CB radios.
Chery Automobile Co., Ltd.

Transmitter Battery Replacement

The recommended replacement bat-
tery is CR2032.
• With the transmitter buttons facing
down, use a flat object to pry the two
halves of the transmitter apart. Make
sure not to damage the seal.
Separating Transmitter Halves
• Remove and replace the batteries.
Avoid touching the new batteries with
your fingers. Skin oils may cause bat-
tery deterioration. If you touch a bat-
tery, clean it with rubbing alcohol.
• To reassemble the transmitter case,
snap the two halves together.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J11Tiggo

Table of Contents