Towing A Disabled Vehicle; Removing And Installing Vehicle Battery - Chery TIGGO User Manual

104 – IN CASE OF AN EMERGENCY
A blown fuse can be identified by the
melted fuse wire.
Fuse Color Amperage
Auburn
Brown
Red
Blue
Yellow
Green
Fuse Color
Pink
Yellow

Towing A Disabled Vehicle

NOTE: Your vehicle is equipped with
tow hooks at both the front and rear.
CAUTION!
Observe the following guidelines when
towing the vehicle:
• Tow the vehicle slowly and smoothly
to avoid damage.
• If the vehicle needs to be steered
while being towed, the ignition
switch must be in the ON position,
not in the LOCK or ACC position.
• Power brake and power steering as-
5 A
sist is not unavailable when the en-
7.5 A
gine is off, the required operational
10 A
force is increased significantly.
15 A
20 A
30 A
Chery Automobile Co., Ltd.
Amperage
CAUTION!
40 A
• Do not attempt to tow this vehicle
60 A
from the front with sling type tow-
ing equipment. Damage to the front
fascia will occur.
Removing and Installing
Vehicle Battery
The following steps must be taken
when removing and installing the bat-
tery:
• Turn the ignition switch and all elec-
trical devices off.
• Remove the negative (-) battery
cable.
(Continued)
(Continued)