Cleaning And Care - Balance KH 8097 Operating Manual

c) Erasing stored measurements
When all memory spaces are occupied, the appliance
automatically overwrites the oldest measurement.
Should you however wish to erase all measured
values, select first of all „ your" memory block.
For this, repeatedly press the button
memory block, „no.1" to „no.3", appears in the display.
Press the button
memory block.
+ Now press the buttons
at the same time. CLA appears in the display. All
measured values in „your" memory block are
now erased.

10. Cleaning and Care

• Carefully clean the equipment and pressure
sleeve using a slightly damp cloth only.
• Do not use chemical agents or solvents for
cleaning.
• Do not, under any circumstances, immerse the
appliance in water, as fluids will penetrate through
to the inside. This would cause irreparable damage
to the appliance.
MEM to call up the indicated
SET
16
until "your"
SET
and
MODE