Saving Measured Values - Balance KH 8097 Operating Manual

9. Saving measured values

The appliance has three memory blocks (numbered 1 to 3),
each with 30 memory locations. It can therefore save
up to 30 measurements for 3 persons, or up to 90 mea-
surements for one person. Additionally, the average of
the last three measurements can also be displayed.
a) How to save a measurement
First of all, select "your" memory block. For this,
repeatedly press the button
memory block, „no.1" to „no.3", appears in the
display.
When you now carry out the measurement process,
as detailed in chapters 5 & 8, the results are saved
into the selected memory block.
DATE TIME
SYS.
mmHg
D I A .
mmHg
PULSE
/MIN.
M
START
MODE SET MEM
/STOP
SET
14
until "your"