Balance KH 8097 Operating Manual page 15

b) Recalling a previous measurement
First of all, select "your" memory block. For this, re-
peatedly press the button
memory block, „no.1" to „no.3", appears in the
display.
Press the button
memory block. There then appears on the lower dis-
play line an A (= average) and, in alternating display,
the average values of the last three measurements
as well as the programmed limit values for the
appropriate individual are shown.
Press the button
screen the number of saved measurement values
for the individual memory block are shown. Pressing
again on the button
through all saved measurement results. The date
and time of measurement for each is indicated.
SET
to call up the indicated
MEM
MEM again. In the lower display
allows you to browse
MEM
15
, until "your"