Belkin G+MIMO User Manual page 38

UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
for static IP connection:
1� IP assigned by IsP – Select "No" if your ISP instructed you to use
fixed IP�
2� IP address – Enter an IP address assigned by your ISP for the
Router WAN interface�
3� subnet Mask – Enter a subnet mask assigned by your ISP�
4� default Gateway – Enter a default gateway IP address assigned by
your ISP�
5� VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameters here� These identifiers are assigned by
your ISP�
6� encapsulation – Select the LLC or VC MUX your ISP uses�
Click "Apply Changes" to save and activate your settings� To go back to
the original settings before saving, click "Clear Changes"� Or click any of
the Quick-Navigation links for other options� Your new settings will not
be saved unless your click "Apply Changes"�
G+ MIMO Wireless Modem Router
1 2 3 4 5 6
setting your IsP Connection Type to static IP (IPoa)
This connection type is also called "Classical IP over ATM" or
"CLIP", which your ISP provides a fixed IP for your Router to
connect to the Internet�
36
7 8 9 10