Belkin G+MIMO User Manual page 35

UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
setting your IsP Connection Type to PPPoe or PPPoa
PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices� It requires a user name and password to
access the network of your ISP for connecting to the Internet� PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK� Select
PPPoE or PPPoA and click "Next"� Then enter the information provided by your ISP, and click "Apply Changes" to activate your settings�
G+ MIMO Wireless Modem Router
1 2 3 4 5 6
1� User name -Enter the user name� (Assigned by your ISP)�
2� Password - Enter your password� (Assigned by your ISP)�
3� Retype Password - Confirm the password� (Assigned by your ISP)�
4� service name (Optional) - A service name is rarely required by an
ISP� If you are not sure if your ISP requires a service name, leave
this blank�
33
7 8 9 10