Fishman Fission Bass Powerchord FX User Manual page 6

Making Connections
Mix Output
The mix output can provide a blend of two signals:
• the original uneffected bass signal
• an effected signal generated by the Powerchord FX
When the effect output is connected, the mix output provides only the
uneffected bass signal. Use a standard ¼-inch instrument cable to connect the
mix output to a bass amplifi er.
Effect Output
This output provides only the effected signal. Use a standard ¼-inch instrument
cable to connect the effect output to a separate bass or electric guitar amplifi er.
9VDC
Power may be supplied by either a 9V battery ( battery compartment
underneath the pedal ) or the Fishman 910-R AC adapter. When the clip|batt LED
comes on you have approximately one hour of remaining battery life
6