Download Print this page

Fishman ABGP Owner's Manual

Onboard acoustic guitar preamp onboard acoustic bass guitar preamp

Advertisement

Quick Links

O
W
N
E
R
'
S
M
A
N
U
A
L
AGP-2
ONBOARD ACOUSTIC GUITAR PREAMP
ABGP
ONBOARD ACOUSTIC BASS GUITAR PREAMP

Advertisement

loading

Summary of Contents for Fishman ABGP

  • Page 1 ’ AGP-2 ONBOARD ACOUSTIC GUITAR PREAMP ABGP ONBOARD ACOUSTIC BASS GUITAR PREAMP...
  • Page 2: Installation

    The AGP-2 is designed specifically for acoustic string instruments including guitars, violins, violas, cellos and mandolins. The ABGP offers the same features as its general purpose counterpart, but has specially selected frequencies specifically chosen for the acoustic bass and the Fishman BP-100 Bass Transducer.
  • Page 3 ONBOARD ACOUSTIC GUITAR PREAMP WARNING INSTALLATION BY A QUALIFIED PROFESSIONAL REPAIRMAN IS STRONGLY RECOMMENDED. FISHMAN TRANSDUCERS WILL NOT BE RESPONSIBLE FOR ANY DAMAGES TO YOUR INSTRUMENT DUE TO IMPROPER INSTALLATION. 2. TEMPLATE A drilling template is provided for drilling the control shaft holes. Cut out the template outline.
  • Page 4: Wiring The Transducer

    AGP-2 / ABGP holes from the inside of the guitar. Next, measure the length of the threaded bushing that protrudes out from the side of the instrument. From this mea- surement, subtract the thickness of the outside hardware (hex nut and finish washer).
  • Page 5 FAILURE TO REMOVE BATTERY COULD RESULT IN DAMAGE TO YOUR INSTRUMENT. Fishman will not be held responsible for any such damage as a 7. MOUNT THE PREAMP Slip the wooden spacer block (prepared earlier) over the control bushings and mount the preamp.
  • Page 6 Tighten the nut with the 1/2" open end wrench while holding the jack in place with the allen wrench.Thread and hand tighten the the strap button. NOTE: With the strap button in place, the end of the jack should protrude slightly to allow proper plug fit. AGP-2 / ABGP...
  • Page 7 Maximum input voltage before clipping with all controls at full boost AGP-2 TONE CONTROLS Treble: Boost and Cut Bass: Boost and Cut Frequency Response ABGP TONE CONTROLS Treble: Boost and Cut Bass: Boost and Cut Frequency Response POWER SUPPLY Battery Life All specifications subject to change without notice.
  • Page 8: Limited Warranty

    Products returned to FISHMAN for repair or replacement must be shipped in accordance with the Return Policy, as follows. This warranty remains valid only if repairs are performed by FISHMAN. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

This manual is also suitable for:

Agp-2